China's Leading MBR Membrane Manufacturer
MBR Without Racks — Flexible, Modular, and Easy to Maintain
SPERTA FrameX™ is a frameless MBR membrane module designed for flexible system design and compact installations. By integrating membrane and aeration into a single modular unit, it eliminates the need for traditional membrane racks, reducing structural complexity and installation time. The modular configuration allows easy capacity expansion by adding units as needed, without redesigning the system. Individual modules can also be removed for maintenance, making operation and servicing significantly more convenient compared to conventional MBR systems.
A frameless, modular MBR membrane designed for compact installations and flexible layouts.
FrameX integrates membrane and aeration into a single modular unit, eliminating the need for traditional membrane racks and reducing structural complexity.
The modular configuration allows easy capacity expansion by adding units as needed, without redesigning the system.
Individual modules can be removed independently for maintenance, making operation and servicing significantly more convenient compared to conventional MBR systems.
Designed for projects under 300 m³/d or installations with limited space, FrameX simplifies system design and shortens installation time.
| Model | SP-FX-10 | SP-FX-14 | SP-FX-28 |
|---|---|---|---|
| Size L×W×H (mm) | 277 × 217 × 1000 | 277 × 217 × 1300 | 277 × 217 × 1780 |
| Nominal Surface Area m² (ft²) | 10 (107) | 14 (150) | 28 (301) |
| Nominal Pore Size (μm) | 0.03 | 0.03 | 0.03 |
| Fiber OD/ID (mm) | 2.0 / 0.9 | 2.0 / 0.9 | 2.0 / 0.9 |
| Fiber Material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Supporting Tube Material | Stainless Steel 316L | Stainless Steel 316L | Stainless Steel 316L |
| Header Material | ABS | ABS | ABS |
| Fiber Structure | Hollow Fiber | Hollow Fiber | Hollow Fiber |
| Surface Properties | Hydrophilic (non-ionic) | Hydrophilic (non-ionic) | Hydrophilic (non-ionic) |
| Filtration Flow Path | Outside-In | Outside-In | Outside-In |
| For Domestic Waste Water (m³/day) | 10 | 5 | 3.6 |
| For Industrial Waste Water (m³/day) | 7 | 3.5 | 2.4 |
| Typical Air Demand (Nm³/h) | 5.88 | 2.94 | 2.1 |
* Custom configurations available on request. Contact SPERTA sales & engineering team for project-specific sizing.
Simple structure. More flexibility.
SPERTA FrameX™ MBR membrane simplifies MBR system design by eliminating frames, reducing complexity, and enabling true modular scalability.
A side-by-side look at system structure and operational flexibility.
| FrameX™ MBR Membrane | Conventional MBR Membrane | |
|---|---|---|
| Structure | Frameless, self-supported | Heavy racks required |
| Installation | Minimal components | Complex assembly |
| Scalability | Add/remove units freely | Redesign often needed |
| Aeration | Integrated per module | Separate system |
| Tank Space | Open, space-efficient | Frames occupy space |
| Maintenance | Single module removal | Full rack lift-out |
| Complexity | Fewer components | More failure points |
| Retrofit | Flexible upgrades | Constrained by structure |
Manufactured in our dedicated membrane production facility with strict process control to ensure consistent membrane quality and performance.
SPERTA uses high-strength braided reinforcement tubes to provide internal mechanical support for membrane fibers. Standard tensile strength reaches over 200N, with higher-strength options available upon request.
Reinforcement tubes are produced through automated continuous production lines, ensuring stable output quality and enabling fast availability through efficient inventory management.
SPERTA utilizes proprietary membrane fiber formation techniques to create a uniform PVDF layer on the reinforcement structure, ensuring consistent pore distribution and strong anti-fouling performance.
After initial performance inspection, membrane fibers are cut to required lengths based on module design specifications, ensuring dimensional accuracy for downstream assembly.
Membrane fibers are precisely potted using high-strength epoxy resin and assembled into FrameX™ modules, ensuring reliable sealing, structural stability, and uniform permeate collection.
Each membrane module undergoes water testing to verify structural integrity and stable filtration performance before it is cleared for packaging and shipment.
Packaging is customized based on transport and project requirements — using export-grade protective crates to ensure product safety and cleanliness during international delivery.
Products are shipped globally and delivered ready for cassette assembly or direct system integration — supporting both new MBR installations and large-scale membrane replacement projects.
All membrane components are produced and inspected in-house — from fiber spinning to final module assembly. Every SPERTA FrameX™ module is manufactured under strict quality control standards, ensuring consistent performance and reliable long-term operation.
Our Partners
SPERTA regularly hosts engineering partners, EPC contractors, system integrators, and project owners at our office and manufacturing facilities for direct technical discussions and hands-on product demonstrations.
Testimonials
FAQ
Everything you need to know before choosing FrameX™ MBR Membrane
Get in Touch
Tell us about your project — our engineering team will respond within 24 hours.
Fill in the form and our engineering team will contact you within 24 hours.
🔒 Your information is kept confidential and never shared with third parties.
Fill in the form and our team will respond within 24 hours.
